Dobinsons Rubber 2.5 Degree Caster Correction Bushing Kit (4 Bushings Per Kit) RB59-522K

FEATURES

• For 0″ to 3″ lift heights.
• High quality rubber, producing the highest ride quality.
• Adjustable during installation to offer 0 to 2.5 of caster adjustment.
• Replaces OE bushes holding front radius arms to the axle.

ABOUT THIS PRODUCT

Dobinsons Spring & Suspension fixed rubber front radius arm caster kit, variable up to 2.5 of caster adjustment, suitable for 0″ to 3″ of lift. Includes 4 x Rubber Eccentric Bushes.

Caster angle plays a major part in vehicle straight line stability and helps the steering to return to center. If the vehicle’s suspension has been raised, the required positive castor angle is reduced and the castor angle moves closer to zero, impairing the vehicles steering stability. A wheel alignment done by a reputable 4×4 wheel alignment center can determine whether caster correction is required.

For suspension lift kits between 75mm/3″ and 90mm/3.5″ caster correction is required, and also adjustable panhard rods are highly recommended. For customers wanting to maximize the off-road performance extended sway bar links and extended brake lines are also recommended. Extending the vehicles bump stops and driveshaft modification may also be required depending on the application. For suspension lift kits exceeding 90mm/3.5″ considerable alignment parts are required. Caster correction, adjustable panhard rods, sway bar extensions, extended bump stops, extended brake lines, gearbox spacing, driveshaft modification, adjustable/modified rear trailing arms and adjustable steering arm modifications are required along with other driveline, suspension and steering modifications which may also be required.

Note: For Off Road Use Only.

RB59-522K Caster Bushing Kit Instructions